Want something a little more special than just loft boarding?
Need some extra space for storage that's easier, cleaner and safer
A loft room that doesn't lower the energy
efficiency of your home but improves it?
Do you need some clean dry insulated
safe to use extra space for storage instead of that dreary, dusty cobwebbed
We can board out your loft space to
create an area to use as a cleaner insulated more useable loft storage area.
Your loft space can contain as much as 3/4 of your downstairs area, why
not utilise this wasted space for storage, hobby room, office, study area,
chill-out room, etc.
We can open up your existing loft
hatch to make it bigger by fitting a large timber fold away loft
ladder which will be more accessible so you can use your loft
We strengthen and raise your
existing joists to support the new room. We don't build onto your
existing ceiling joist, they will most likely be too weak to take the
weight. And when we build the raised supported
floor you can add or keep your loft
insulation levels to the correct level and not have to remove it to
install the new floor.
build stud walls and
batten the roof rafters,
install the latest technology eco loft thermal bubble layer foil wall and
roof insulation. Then put up plasterboard walls
and skim them, add some skirtings, a basic LED tube light and we are done..
Thermal foil bubble insulation on the
walls and roof will prevent the extremes of temperature change in a loft
thus providing a more stable temperature for storing in your loft.
Add in some roof windows, ceiling lighting and sockets.
We even add skirting boards to trim
neatly, ventilation and electrical air extraction for when in use,
balustrades, safety rails, smoke alarms and lighting. Why not add access
doors to eaves to create much needed storage in the harder to access areas.
What about a Velux roof window, some sockets or fancy ceiling spot lighting.
NO PLANNING PERMISSION REQUIRED
Take a look at some of our recent completed mini loft room projects
Here you can see some fine examples of our loft rooms. All ready to
decorate and use as a home office, hobby room, study room, chill-out area.
So what's the difference between just loft boarding and a
mini loft conversion / luxury loft storage?
They are cleaner and
practically dust free. Its a sealed storage area, ideal for people with allergy's.
Keeps out the spiders, flies and wasps and stops you walking in to cobwebs
or in to unsafe un-boarded areas.
You can use them as extra wardrobe
space, study rooms, chill-out spaces, home office in fact many lightweight
uses. (Not recommend to use as a bedroom, gym or exercise space)
The insulated roof and walls help control the extreme fluctuations of hot
and cold temperature changes and makes it more stable for storing items that
could be affected by extreme cold and heat changes.
temperatures can go as low as 1°C and as high as 60°C a difference of
59° , double foil bubble insulation can reduce this difference to
approximately 14° which is great for more temperature sensitive items.
The plaster boarded
roof and walls keep everything in and prevents anything from falling out on
to your ceiling and also you from falling into a none boarded area.
A more suitable
environment and comfortable temperature for browsing through your keep sakes and belongings
and occasional use.
How much does it cost?
Prices start from £4000 upwards, based on an average small 2 bed terraced size house fully fitted including
hatch, ladder, floor, insulation,walls, skirtings, basic lighting and labour.
Cost mainly depends on how much of the loft area you require to convert, but its definitely a lot more affordable than a full loft conversion
thats for sure.
We offer FREE no obligation surveys by a qualified & trained installer.
How long does it take to do?
Depending on how big your loft is to start with but for example 2/3 bed
house can take around 6 days but this will be determined by the surveyor when he visits and he will advise on approximately how long it could take.
So what's the advantage of having a luxury storage room?
Well for one thing it keeps the spiders at bay, its clean and not as vulnerable to the elements that a roof void is exposed to such as extremely hot days and freezing cold days causes huge increases and decreases in loft temperature.
With the foil bubble thermal insulated shield we install behind the plasterboard it prevents the cold and heat getting through and keep the heat in the room to.
Adding the required thermal insulation will ensure the energy efficiency of
this room is at its best. Also adding this layer will help increase your
overall homes energy efficiency.
If it gets a bit warm we
can install an electrical air vent extractor and you can even go ahead and have a
Velux roof window installed for some natural light and air. Only use a Velux
approved installer for this.
So how is it all done?
Below you can see the process involved and most mini loft rooms can be
completed in around 6 to 10 days so not long to wait to get your new room.
We do almost everything required, so its ready for you to decorate. We
can install Velux windows as an added extra, please mention this if you
require these to be included in your FREE quote. Also if you require sockets or lighting
we have our own qualified electrician who can do all the work to BS7671 / Part P of the building regulations and give you an electrical works installation certificate for your records.
The process of creating a room in your loft requires first and foremost a
safe strong supported sub-frame for the flooring. Just using 3x2 or battening
is no good, its will not be anywhere near strong enough to take the load for
the purpose of using as a room (Load: meaning total weight of wood, flooring,
plasterboard & plaster, storage and people).
Installing one of our specialist floors adds strength and support for all
your rooms requirements. We raise the floor up above your joists so as to
give clearance for air circulation and so as not to bear any weight on to
the existing ceiling joists. The sub-frame we build will level and support
the room we are about to build.
Once the supported raised sub-frame is down we relay or top-up the
insulation in between the new raised joists then we lay the 18mm high
density floor panels.
So what's the process?
Here is atypical example of a mini loft conversion
Mini Loft Conversion Start by installing a strengthened sub-frame floor to board on to and a loft ladder and hatch.
Mini Loft Conversion Now we start to build the stud work for the thermal walls
Mini Loft Conversion
We then add the insulation using double foiled bubble for the walls and roof
Mini Loft Conversion Now to plasterboard the walls and ceiling and add an access door in to the storage area of the loft.
Mini Loft Conversion
Now we add some lighting, ventilation and skirting boards.
Mini Loft Conversion Now its ready decorate and carpet.
Why is it important to put ventilation in?
We always recommend installing some kind of ventilation or extractor simply to keep the air flowing in your new loft room.
It can get very warm and stuffy without any air movement even if the loft
hatch is open warm air rises and forms above the highest point in your loft and
has nowhere to escape which is why we always install either mechanical vents or
electric extractors to help pull round the air in the loft room.
Also its a good idea to allow air to flow around your loft room so that the remaining eaves and general areas can also have adequate ventilation to prevent any condensation build up.
The raised floor we use to board on to is also designed and installed in such away as to allow air to flow underneath your floor and around your insulation.
This is also very important as boarding directly on to your joists is not good practice and will cause major problems.
What is a sub-frame for?
Sub-frames are basically a supporting frame under the boarding to allow the boarded area to be raised or for adding better support and strength.
To get the strength you need to build a room in a loft, the sub-frame has to be
done in a specific way as basic battening or some 3x2 will not be adequate to
take the load.
Any lofts that have any insulation protruding above the joists will require a sub-frame
building anyway before even boarding just for storage.
Boarding directly on to your joists by removing or squashing insulation is bad practice nowadays and may even affect your building insurance or building warranties. Today everything in the building trade has to be done in accordance with building regulations and the rules must not be broken.
A Sub-frame will not only add the extra support required it will also allow your insulation and loft to breathe. Stopping air circulation in lofts by boarding all of your loft or blocking eaves and roof soffit vents can cause problems like condensation build up
which causes mould.
Your insulation should never be squashed down to get storage, and if a sub-frame
is installed above your insulation do not box in the ends leave them so air can pass underneath your storage floor and
through the insulation so it can work efficiently. This method of boarding is
called energy efficient boarding.
What sort of access will I need?
There are various methods to get in and out of your loft but for loft rooms we
recommend a wood folding wide tread ladder for maximum access space and to
create a good entrance to your loft room.
These makes access even easier, especially those of us that are not so
confident on standard metal rung ladders.
- Made from solid spruce
- FSC & PEFC certified
- Draft sealed trap door
- Rubber draught excluder around door frame
- Handrail to aid safe climbing
- Slip resistant treads & feet
- Extension kit available for taller ceilings
- Easy use; timber pull & push rod
- Tested & certified to EN 14975:2006
- Fits in UK standard 600mm joist centres
- 20mm thick trapdoor insulation reduces heat loss
- Requires no arc of clearance or storage space in the loft
- 115cm L - 55cm W
The wood option has a wide tread step, so a lot like a solid pair of step ladders which are attached to the back of the loft door so they are easy to operate with a spring loaded assist on the door.
The next step
If you are interested in using your loft space for clean sealed storage or light hobby
study or home office then why not call to arrange a FREE no obligation survey so we can explain what will be the best options and what we can offer you.
If you require a FREE quote for a mini loft conversion
we cover the Northwest & West Yorkshire simply call us on 0161 663 2651
- 01254 370073 - 0151 553 0067 - 01772 361163 - 0113 332 2651
or our FREE phone number 0800 87 999 67 or e-mail us
Do we install these rooms where you live?
look and see if your postcode is in our list below.
CH PR SK M WA BB OL L BL WN LA FY CW BD HD HX LS OL S72 WF (Some LA
postcodes are not covered at the moment, please call)
All lofts are different and do require a survey to determine the requirements
like materials, labour involved and most importantly to check your loft is
suitable to have this work done.
Its not as complicated as a full loft conversion, and a luxury loft room
is only for storage and occasional use and doesn't require all that major work
normally associated with full loft conversions.
Maybe you want a hobby room, study, home office or a clean storage area or maybe even an eBay stock room or somewhere to set up a train set or car racing set.
This is not a full loft conversion, and not to be used as a living or habitable room. We never recommend these rooms are used for sleeping in or using as a bedroom as this would involve
a lot more work to comply with the building and fire regulations required
for converting into a living/habitable space. We only build loft rooms suitable for storage and occasional light use
which do not require the same regulations.